(08) 9249 5550
Get a quote

BendPak HD-9

4,082 kg standard-width four-post hoist for vehicle storage, general under-vehicle service and workshop applications needing a practical drive-on platform.
Get a Vehicle Hoist Quote
View Specifications
Call Iron Lift

Clear-floor two-post

BendPak HD-9

4,082 kg Standard-Width Four-Post Parking / Service Hoist

4,082 kg standard-width four-post hoist for vehicle storage, general under-vehicle service and workshop applications needing a practical
drive-on platform.

Freight and installation options available — contact us for details.

Request a Quote
Ask About Installation
Call (08) 9249 5550
Quote only · Supply, installation planning, service, and spare parts from Malaga, WA
4,082 kg
Rated capacity
Standard-width four-post
Configuration
1,905 mm
Maximum lifting height
2,197 mm
Drive-through clearance

Product overview

The BendPak HD-9 is the standard-width model at the centre of the HD-9 family. Its 4,082 kg capacity, open-centre runway layout and broad drive-through clearance suit a wide range of passenger vehicles, SUVs and light trucks within the published dimensional limits. Adjustable runway spacing, mechanical safety locks and accessory rails make the platform adaptable to parking, storage and general workshop use. For buyers who do not need the narrower HD-9ST or the extended/high-rise variants, the HD-9 provides a straightforward four-post foundation for a professional bay.

Key features

  • 4,082 kg rated lifting capacity
  • Standard 2,800 mm overall width
  • 2,197 mm drive-through clearance
  • Open-centre platform for under-vehicle access
  • Adjustable runway spacing of 889-1,041 mm
  • Low-profile drive-on geometry
  • Multiple mechanical safety-lock positions
  • Pneumatic lock release and secondary slack-cable protection
  • Optional caster/mobility system where approved
  • Runway rails for rolling bridge jacks and other compatible accessories

Detail photography

Standard-width four-post footprint
Adjustable runway spacing
Approach ramps and runway profile
Under-runway hydraulic cylinder
Cable/sheave and anti-sway components
Lock ladders and safety latches
Optional caster kit / rolling jack setup where shown

Ideal for

Mechanical workshops, performance and collector facilities, general garages and vehicle-storage applications that want a versatile standard-width 4,082 kg four-post platform.

Specifications

Specifications

Details

Capacity
4,082 kg
Configuration
Standard-width four-post
Overall width
2,800 mm
Overall length
5,093 mm
Drive-through clearance
2,197 mm

Factory dimension drawing

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model
BendPak HD-9
BendPak SKU
5175861
Rated lifting capacity
4,082 kg
Configuration
4,082 kg
Minimum runway height
127 mm
Maximum rise
1,778 mm
Maximum lifting height
1,905 mm
Time to full rise
Current Genesis listing states 50 seconds; re-check exact supplied configuration before publication
Overall width
2,800 mm
Outside length
4,420 mm
Overall length
5,093 mm
Column height
2,235 mm
Width between columns
2,546 mm
Drive-through clearance
2,197 mm
Runway width
483 mm
Runway length
4,019 mm
Width between runways
889-1,041 mm
Minimum wheelbase / rated-capacity reference
2,921 mm at rated capacity
Locking
14 positions; 102 mm spacing
Power unit
2 HP on current manufacturer page; Australian voltage/frequency to be confirmed before publication
Model-specific note
Core HD-9 standard-width platform; current manufacturer geometry differs from older Genesis technical table

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model

Lifting time

Max lifting height without adapter

Max lifting height with adapter

Max lock height without adapter

Max lock height with adapter

Overall height

Overall width

Drive-through clearance

Width between columns

Minimum pad height

Short arm reach

Long arm reach

Gross weight

Pad / pin

What’s included

  • Four-post hoist structure with four columns, crossbeams and model-specific runways.
  • Electric-hydraulic lifting system with the model-specific under-runway hydraulic cylinder and cable equalisation arrangement.
  • Multi-position mechanical safety locks, adjustable lock ladders and secondary slack-cable safety protection where specified for the exact model.
  • Push-button pneumatic safety-lock release system where specified for the exact model.
  • Approach ramps / wheel stops and runway accessory rails as supplied with the Australian configuration.

Options

  • Compatible rolling bridge jack(s) for wheel-off service, subject to exact model capacity and Australian availability.
  • Drip trays, rolling drain pan, jack platform and/or solid deck accessories where compatible with the exact model.
  • Portable wheel/caster kit on compatible HD-series models only.
  • Drive-through or alternative approach-ramp configuration where approved for the exact model.

Workshop fit

BendPak HD-9 is rated to 4,082 kg. Key published dimensions in this brief include overall width 2,800 mm, overall length 5,093 mm, runway length 4,019 mm, width between columns 2,546 mm, drive-through clearance 2,197 mm and maximum lifting height 1,905 mm. Confirm actual vehicle mass and axle loads, wheelbase/track, tyre/runway positioning, approach clearance, raised-vehicle height, bay width/length/ceiling, slab/foundation requirements, electrical supply, compressed-air requirements, unloading/assembly access and the exact installation manual before supply. Rated capacity alone does not establish vehicle suitability. AUSTRALIAN CONFIGURATION CHECK: Do not present this model as locally stocked, immediately available or technically final for Australia until Michael/Genesis confirms the exact supplied revision/configuration. The page may be built in staging so the catalogue is ready

Frequently asked questions

What is the difference between the HD-9 and HD-9ST?
The HD-9 uses the wider standard-width layout, giving more drive-through room; the HD-9ST is intended for narrower bays.
Yes. The open-centre runway design supports under-vehicle access, and compatible bridge jacks can add wheel-off service capability.
The Australian listing appears to contain an older geometry. This brief uses the current BendPak manufacturer data; Iron Lift should confirm the exact Australian-supplied revision before final publication.
Compatible caster/wh
Confirm bay width/length/height, vehicle dimensions and axle loads, slab/foundation, electrical supply, compressed air, unloading access and the current installation manual.

Related Pages

Two-Post Hoists

Installation

Servicing & Repairs

Spare Parts

Request a Quote

Related Products

Related products

View All Four-Post Hoists

Installation Service

Installation

Servicing & Repairs

Spare Parts

Documents

brochure

Download

manual

Download

dimension drawing

Download

Request a vehicle hoist quote

Tell us your vehicle mix, available bay dimensions, storage/service requirements, slab details, power/air supply and location and we will help confirm whether the BendPak HD-9 is the right standard-width four-post hoist.”