(08) 9249 5550
Get a quote

BendPak P9000LTF

Flush-mounted 4,082 kg low-rise open-centre lift for fast wheel, brake and service work where high capacity and a clear workshop floor are priorities.
Get a Vehicle Hoist Quote
View Specifications
Call Iron Lift

Clear-floor two-post

BendPak P9000LTF

4,082 kg Flush-Mount Low-Rise Open-Centre Scissor Lift

Flush-mounted 4,082 kg low-rise open-centre lift for fast wheel, brake and service work where high capacity and a clear workshop floor are priorities.

Freight and installation options available — contact us for details.

Request a Quote
Ask About Installation
Call (08) 9249 5550
Quote only · Supply, installation planning, service, and spare parts from Malaga, WA
4,082 kg
Rated capacity
Flush low-rise
Configuration
610 mm
Maximum lifting height
Flush-mount
Lowered / installation profile

Product overview

The BendPak P9000LTF is included in this primarily mid/full-rise selection because it brings substantially more capacity than the lighter mid-rise models while disappearing into the floor when lowered. The open-centre twin-pad layout is suited to quick service, wheel, brake, suspension and inspection work, with pneumatic lock release and multiple mechanical locking positions supporting repeatable workshop use. It is not a replacement for a full-rise hoist where standing underbody access is required, but it can be an efficient high-capacity service-bay lift where speed, wheel access and floor integration matter more than maximum height.

Key features

  • 4,082 kg rated lifting capacity
  • Flush-mount recessed installation
  • Open-centre low-rise service layout
  • 610 mm published maximum lifting height
  • 686 mm published height with blocks
  • Four published mechanical locking positions
  • Pneumatic lock release
  • Electronic push-button operation
  • Rubber-topped vehicle contact surfaces / blocks
  • Compatible P9000 telescoping arm and ramp-filler accessories available

Detail photography

Flush-mount floor integration
Open-centre platform layout
Mechanical lock positions
Pneumatic lock-release components
Rubber contact surfaces and blocks
Hydraulic lifting arrangement
Control unit
Optional telescoping arm kit where shown

Ideal for

High-throughput wheel and brake bays, quick-service workshops, tyre stores, fleet facilities and workshops wanting 4,082 kg lowrise capacity without leaving a permanent obstruction above floor level.

Specifications

Specifications

Details

Capacity
4,082 kg
Configuration
Flush-mount open-centre pit-style low-rise lift
Rise class
Low-rise
Maximum lifting height
610 mm
Installation type
Recessed / flush-mount

Factory dimension drawing

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model
BendPak P9000LTF
BendPak SKU
5175155
Rated lifting capacity
4,082 kg
Rise class
4,082 kg
Configuration
Flush-mount open-centre pit-style low-rise lift
Installation type
Recessed / flush-mount
Maximum lifting height
610 mm
Maximum height with blocks / adapters
686 mm
Lowered / floor profile
Flush with finished floor when correctly recessed; physical lowered platform height approx. 102 mm
Published lifting time
45 seconds
Published locking positions
381 / 483 / 546 / 622 mm
Platform / pad dimensions
Approx. 1,486 x 610 mm per pad/platform
Overall / working length
Approx. 1,890 mm overall
Platform spacing / width reference
Width between platforms approx. 584-1,067 mm
Width between platforms
584-1,067 mm
Motor
1.5 HP
Electrical configuration
Current US page: 208-230 V, 60 Hz, 1-phase. Confirm Australiansupplied electrical configuration before publication.
Air / pneumatic requirement
Pneumatic lock release; confirm workshop-air requirement from exact Australian manual/configuration.
Shipping / supplied-revision reference
Approx. 514 kg on current manufacturer page; verify Australian supplied revision.
Australian publication rule
Confirm exact Genesis/Iron Lift Australian supplied revision, electrical configuration, manuals and availability before live publication.

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model

Lifting time

Max lifting height without adapter

Max lifting height with adapter

Max lock height without adapter

Max lock height with adapter

Overall height

Overall width

Drive-through clearance

Width between columns

Minimum pad height

Short arm reach

Long arm reach

Gross weight

Pad / pin

What’s included

  • P9000LTF recessed twin lift/platform assemblies.
  • Hydraulic power/control system for the exact model.
  • Mechanical safety-lock system with pneumatic release.
  • Rubber vehicle contact blocks/pad surfaces supplied with the exact configuration.
  • Model-specific installation/operation documentation.

Options

  • BendPak P9000 telescoping arm kit where confirmed compatible.
  • BendPak P9000 ramp filler plate kit where appropriate.
  • Approved contact blocks/adapters for compatible vehicles.
  • Recess/pit planning, installation and commissioning.

Workshop fit

BendPak P9000LTF is rated to 4,082 kg and is a flush-mount open-centre pit-style low-rise lift. Published maximum lift is 610 mm; installation profile is recessed / flush-mount. Confirm vehicle mass and weight distribution, manufacturer-approved lifting points, ground clearance, track/wheelbase or pad reach, workshop bay dimensions, overhead clearance at full lift, electrical and pneumatic services, and the exact slab/foundation/recess requirements before supply or installation. Rated capacity alone does not establish vehicle suitability. For flush-mount products, the site recess/pit must be built to the exact supplied manual/revision – never from a generic scissor-lift drawing.

Frequently asked questions

Why include a low-rise model in a mid/full-rise focused range?
The P9000LTF offers a higher 4,082 kg capacity and flush-floor integration, making it useful for heavy quick-service work even though it does not provide full standing height.
The current BendPak manufacturer page lists 610 mm maximum lifting height and 686 mm with blocks.
Yes, when installed in the correct recess. The structural/pit details must follow the installation manual and site design.
BendPak currently lists a P9000 telescoping arm kit as an accessory. Vehicle suitability and arm use must be checked against the exact model and application.
It is primarily a low-rise service lift. Do not market it as a wheel-alignment platform unless the exact equipment/configuration and alignment use are separately verified.

Related Pages

Two-Post Hoists

Installation

Servicing & Repairs

Spare Parts

Request a Quote

Related Products

Related products

View All Scissor Hoists

Installation Service

Installation

Servicing & Repairs

Spare Parts

Documents

brochure

Download

manual

Download

dimension drawing

Download

Request a vehicle hoist quote

Tell us the vehicles you service, required capacity, bay/recess dimensions, wheel-service workflow, power/air services and location and we will help assess the BendPak P9000LTF installation.