(08) 9249 5550
Get a quote

BendPak 12APF

5,443 kg open-top floorplate two-post hoist for heavier vehicles in workshops where a conventional overhead beam is not practical.
Get a Vehicle Hoist Quote
View Specifications
Call Iron Lift

Clear-floor two-post

BendPak 12APF

5,443 kg Low-Ceiling Open-Top Two-Post Hoist

5,443 kg open-top floorplate two-post hoist for heavier vehicles in workshops where a conventional overhead beam is not practical.

Freight and installation options available — contact us for details.

Request a Quote
Ask About Installation
Call (08) 9249 5550
Quote only · Supply, installation planning, service, and spare parts from Malaga, WA
5,443 kg
Rated capacity
Floorplate / open-top heavy-duty two-post
Configuration
3,677 mm
Overall height
2,597 mm
Drive-through clearance

Product overview

The BendPak 12APF applies the open-top floorplate concept to a 5,443 kg capacity class. With no overhead beam spanning the vehicle, it is relevant to lower-ceiling workshops or facilities where tall roofs, ladder racks, doors or building services would conflict with a clearfloor overhead structure. The wider heavy-duty geometry and AP-series arm system provide a stronger option for heavier SUVs, utes, vans and commercial vehicles, but Australian supply should be confirmed before this page is published live.

Key features

  • 5,443 kg rated lifting capacity
  • Open-top floorplate layout
  • Approx. 3,677 mm overall height
  • 3,026 mm between columns
  • 2,597 mm drive-through clearance
  • 38 mm high protective floorplate
  • Long-reach AP-series arms
  • Automatic arm restraints
  • Single-point safety-lock release
  • 68-second published lifting time

Detail photography

Open-top heavy-duty column arrangement
Floorplate routing cover
AP-series long-reach arms
ASARS arm-restraint system
Direct-drive hydraulic components
Safety locks and vehicle-contact pads

Ideal for

Lower-ceiling heavy-light-commercial workshops, fleet facilities and service bays needing 5,443 kg two-post capacity without an overhead beam.

Specifications

Specifications

Details

Capacity
5,443 kg
Configuration
Floorplate / open-top heavy-duty two-post
Overall height
3,677 mm
Overall width
3,937 mm
Drive-through clearance
2,597 mm

Factory dimension drawing

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model
BendPak 12APF
BendPak SKU
5175670
Rated lifting capacity
5,443 kg
Maximum load per arm
5,443 kg
Configuration
Floorplate / open-top heavy-duty two-post
Rise
1,778 mm
Published lifting height
1,867 mm with pad
Minimum pad / lifting height
114 mm
Time to full rise
68 seconds
Overall height
3,677 mm
Overall width
3,937 mm
Width between / inside columns
3,026 mm
Drive-through clearance
2,597 mm
Front arm reach
660-1,403 mm
Rear arm reach
749-1,524 mm
Power unit
5 HP; Australian voltage/frequency and supply package to be confirmed before publication
Model-specific note
Open-top 12,000-lb-class floorplate model; Australian supply not currently surfaced on Genesis BendPak brand page

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model

Lifting time

Max lifting height without adapter

Max lifting height with adapter

Max lock height without adapter

Max lock height with adapter

Overall height

Overall width

Drive-through clearance

Width between columns

Minimum pad height

Short arm reach

Long arm reach

Gross weight

Pad / pin

What’s included

  • Two-post floorplate hoist structure, columns and base plates for the exact model.
  • Model-specific lifting-arm assemblies and vehicle-contact pads/adapters supplied with the Australian package.
  • Hydraulic lifting system, power unit, equalisation system and safety-lock system.
  • Automatic Swing Arm Restraint System (ASARS) where specified for the exact model.
  • Protective floorplate/cover across the bay for hydraulic and equalisation routing.

Options

  • Compatible truck/van height adapters and frame-contact accessories approved for the exact model.
  • Pinch-weld pads/pucks, frame cradle pads and replacement contact-pad options where compatible.
  • Wheel spotting accessories and compatible workshop accessories where required.
  • Air/electric workstation or other column-mounted service accessories where compatible.

Workshop fit

BendPak 12APF is rated to 5,443 kg. Key published workshop dimensions in this brief include overall height 3,677 mm, overall width 3,937 mm, inside-column width 3,026 mm and drive-through clearance 2,597 mm. Confirm actual vehicle mass, individual arm loading, centre of gravity/weight distribution, manufacturer lifting points, arm reach, required pads/adapters, vehicle height, bay width, ceiling and overhead services, electrical supply, slab condition/strength/anchoring requirements, unloading access and the exact installation manual before supply. Rated capacity alone does not establish vehicle suitability. AUSTRALIAN AVAILABILITY HOLD: Do not present this model as locally stocked, immediately available or confirmed for Australian supply until Michael/Genesis confirms it. The page may be built in staging so the catalogue is ready.

Frequently asked questions

Is the 12APF currently listed by Genesis Australia?
A dedicated current product listing was not found on the supplied Genesis BendPak brand/range pages during this research. Confirm Australian supply before publication.
5,443 kg, with a published maximum of 1,361 kg per arm.
It avoids an overhead beam across the bay, which can help with low ceilings and tall vehicle roof equipment.
Yes. The hydraulic/equalisation routing crosses the bay beneath a low protective floorplate.
Yes. Once supplier availability and Australian configuration are confirmed, Iron Lift can quote the equipment and installation.

Related Pages

Two-Post Hoists

Installation

Servicing & Repairs

Spare Parts

Request a Quote

Related Products

Related products

View All Two-Post Hoists

Installation Service

Installation

Servicing & Repairs

Spare Parts

Documents

brochure

Download

manual

Download

dimension drawing

Download

Request a vehicle hoist quote

Tell us your ceiling restrictions, vehicle weights, bay dimensions, slab and location. We will first confirm Australian supply of the BendPak 12APF and then assess suitability.