(08) 9249 5550
Get a quote

BendPak 10APX-181

4,536 kg extended-height high-rise two-post hoist combining approximately 2,019 mm rise plus pad with a 4,597 mm overall structure for tall workshop bays.
Get a Vehicle Hoist Quote
View Specifications
Call Iron Lift

Clear-floor two-post

BendPak 10APX-181

4,536 kg Extended-Height High-Rise Two-Post Hoist

4,536 kg extended-height high-rise two-post hoist combining approximately 2,019 mm rise plus pad with a 4,597 mm overall structure for tall workshop bays.

Freight and installation options available — contact us for details.

Request a Quote
Ask About Installation
Call (08) 9249 5550
Quote only · Supply, installation planning, service, and spare parts from Malaga, WA
4,536 kg
Rated capacity
Extended-height high-rise clearfloor two-post
Configuration
4,597 mm
Overall height
2,337 mm or 2,591 mm
Drive-through clearance

Product overview

The BendPak 10APX-181 combines the high-rise lifting geometry of the 10APX with a substantially taller overhead structure. At approximately 4,597 mm overall height, it is aimed at facilities that service high-roof vans and other tall vehicles while still wanting the adaptable width and mixed-vehicle capability of the AP family. For the right bay, this model gives technicians more room both above and below the vehicle, but the ceiling and building-services clearance needs to be checked carefully before installation.

Key features

  • 4,536 kg rated lifting capacity
  • Approx. 4,597 mm overall height
  • Approx. 2,019 mm rise plus pad
  • Clearfloor design
  • Two published installation widths
  • Bi-Metric arm positioning
  • Triple-telescoping AP-series arms
  • Automatic arm restraints
  • Dual direct-drive cylinders
  • Single-point safety-lock release

Detail photography

181-inch overhead structure
High-rise arm/carriage position
Expandable top beam
Bi-Metric arm arrangement
ASARS arm restraint
Hydraulic and safety-lock system

Ideal for

High-roof van workshops, fleet facilities, dealerships and service centres with tall bays needing both increased overhead clearance and high technician working height.

Specifications

Specifications

Details

Capacity
4,536 kg
Configuration
Extended-height high-rise clearfloor two-post
Overall height
4,597 mm
Overall width
3,429 mm or 3,683 mm
Drive-through clearance
2,337 mm or 2,591 mm

Factory dimension drawing

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model
BendPak 10APX-181
BendPak SKU
5175307
Rated lifting capacity
4,536 kg
Maximum load per arm
4,536 kg
Configuration
Extended-height high-rise clearfloor two-post
Rise
1,918 mm
Published lifting height
2,019 mm rise + pad
Minimum pad / lifting height
102 mm
Time to full rise
45 seconds
Overall height
4,597 mm
Overall width
3,429 mm or 3,683 mm
Width between / inside columns
2,756 mm or 3,010 mm
Drive-through clearance
2,337 mm or 2,591 mm
Front arm reach
622-1,270 mm
Rear arm reach
813-1,505 mm
Power unit
5 HP; Australian voltage/frequency to be confirmed before publication
Model-specific note
181 in / 4,597 mm overall height with high-rise lifting geometry

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model

Lifting time

Max lifting height without adapter

Max lifting height with adapter

Max lock height without adapter

Max lock height with adapter

Overall height

Overall width

Drive-through clearance

Width between columns

Minimum pad height

Short arm reach

Long arm reach

Gross weight

Pad / pin

What’s included

  • Two-post hoist structure, columns and base plates for the exact model.
  • Model-specific lifting-arm assemblies and vehicle-contact pads/adapters supplied with the Australian package.
  • Hydraulic lifting system, power unit, equalisation system and safety-lock system.
  • Automatic Swing Arm Restraint System (ASARS) where specified for the exact AP-series model.
  • Overhead safety shut-off arrangement on clearfloor models.

Options

  • Compatible truck/van height adapters and frame-contact accessories approved for the exact model.
  • Pinch-weld pads/pucks, frame cradle pads and replacement contact-pad options where compatible.
  • Wheel spotting accessories and compatible workshop accessories where required.
  • Air/electric workstation or other column-mounted service accessories where compatible.

Workshop fit

BendPak 10APX-181 is rated to 4,536 kg. Key published workshop dimensions in this brief include overall height 4,597 mm, overall width 3,429 mm or 3,683 mm, inside-column width 2,756 mm or 3,010 mm and drive-through clearance 2,337 mm or 2,591 mm. Confirm actual vehicle mass, individual arm loading, centre of gravity/weight distribution, manufacturer lifting points, arm reach, required pads/adapters, vehicle height, bay width, ceiling and overhead services, electrical supply, slab condition/strength/anchoring requirements, unloading access and the exact installation manual before supply. Rated capacity alone does not establish vehicle suitability.

Frequently asked questions

What is the overall height?
Approximately 4,597 mm.
4,536 kg, with a published maximum of 1,134 kg per arm.
The current published rise plus pad is approximately 2,019 mm.
The current manufacturer still publishes two overall-width configurations.
Ceiling height, door tracks, lights/services, slab, vehicle height, lifting points, site power and unloading access should all be reviewed.

Related Pages

Two-Post Hoists

Installation

Servicing & Repairs

Spare Parts

Request a Quote

Related Products

Related products

View All Two-Post Hoists

Installation Service

Installation

Servicing & Repairs

Spare Parts

Documents

brochure

Download

manual

Download

dimension drawing

Download

Request a vehicle hoist quote

Send us your tallest vehicle dimensions, ceiling height, door/service clearances, bay width, slab details and location and we will help confirm whether the BendPak 10APX-181 is appropriate.