(08) 9249 5550
Get a quote

BendPak 10AP-168

4,536 kg extended-height clearfloor two-post hoist with a 4,267 mm overall height for workshops needing more overhead clearance around taller vehicles.
Get a Vehicle Hoist Quote
View Specifications
Call Iron Lift

Clear-floor two-post

BendPak 10AP-168

4,536 kg Extended-Height Clearfloor Two-Post Hoist

4,536 kg extended-height clearfloor two-post hoist with a 4,267 mm overall height for workshops needing more overhead clearance around taller vehicles.

Freight and installation options available — contact us for details.

Request a Quote
Ask About Installation
Call (08) 9249 5550
Quote only · Supply, installation planning, service, and spare parts from Malaga, WA
4,536 kg
Rated capacity
Extended-height adaptable clearfloor two-post
Configuration
4,267 mm
Overall height
2,337 mm or 2,591 mm
Drive-through clearance

Product overview

The BendPak 10AP-168 takes the adaptable 10AP platform and extends the overhead structure to approximately 4,267 mm. That additional height is useful in taller workshops servicing vans, 4WDs, utes and mixed fleets where a standard-height overhead beam may restrict vehicle positioning or technician working room. The clearfloor layout, adjustable width and AP-series arm system are retained, so the 10AP-168 remains a flexible general-service two-post hoist rather than a single-purpose tall-vehicle machine.

Key features

  • 4,536 kg rated lifting capacity
  • Approx. 4,267 mm overall height
  • Clearfloor layout
  • Two published overall-width configurations
  • Bi-Metric symmetric/asymmetric positioning
  • Triple-telescoping AP-series arms
  • Automatic arm restraints
  • Dual direct-drive hydraulic cylinders
  • Single-point safety-lock release
  • 45-second published lifting time

Detail photography

Extended-height overhead beam
Expandable-width top-beam connection
Triple-telescoping arms
ASARS arm restraint
Low-profile pad receiver
Direct-drive cylinder and safety-lock details

Ideal for

Workshops with suitable ceiling height that regularly service taller vans, SUVs, 4WDs and light-commercial vehicles while still requiring broad passenger-vehicle coverage.

Specifications

Specifications

Details

Capacity
4,536 kg
Configuration
Extended-height adaptable clearfloor two-post
Overall height
4,267 mm
Overall width
3,429 mm or 3,683 mm
Drive-through clearance
2,337 mm or 2,591 mm

Factory dimension drawing

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model
BendPak 10AP-168
BendPak SKU
5175305
Rated lifting capacity
4,536 kg
Maximum load per arm
4,536 kg
Configuration
Extended-height adaptable clearfloor two-post
Rise
1,753 mm
Published lifting height
1,854 mm rise + pad
Minimum pad / lifting height
102 mm
Time to full rise
45 seconds
Overall height
4,267 mm
Overall width
3,429 mm or 3,683 mm
Width between / inside columns
2,756 mm or 3,010 mm
Drive-through clearance
2,337 mm or 2,591 mm
Front arm reach
622-1,270 mm (current BendPak manufacturer page; Genesis page currently shows an older 559-1,207 mm front-arm figure)
Rear arm reach
813-1,505 mm
Power unit
5 HP; Australian voltage/frequency to be confirmed before publication
Model-specific note
168 in / 4,267 mm overall-height configuration

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model

Lifting time

Max lifting height without adapter

Max lifting height with adapter

Max lock height without adapter

Max lock height with adapter

Overall height

Overall width

Drive-through clearance

Width between columns

Minimum pad height

Short arm reach

Long arm reach

Gross weight

Pad / pin

What’s included

  • Two-post hoist structure, columns and base plates for the exact model.
  • Model-specific lifting-arm assemblies and vehicle-contact pads/adapters supplied with the Australian package.
  • Hydraulic lifting system, power unit, equalisation system and safety-lock system.
  • Automatic Swing Arm Restraint System (ASARS) where specified for the exact AP-series model.
  • Overhead safety shut-off arrangement on clearfloor models.

Options

  • Compatible truck/van height adapters and frame-contact accessories approved for the exact model.
  • Pinch-weld pads/pucks, frame cradle pads and replacement contact-pad options where compatible.
  • Wheel spotting accessories and compatible workshop accessories where required.
  • Air/electric workstation or other column-mounted service accessories where compatible.

Workshop fit

BendPak 10AP-168 is rated to 4,536 kg. Key published workshop dimensions in this brief include overall height 4,267 mm, overall width 3,429 mm or 3,683 mm, inside-column width 2,756 mm or 3,010 mm and drive-through clearance 2,337 mm or 2,591 mm. Confirm actual vehicle mass, individual arm loading, centre of gravity/weight distribution, manufacturer lifting points, arm reach, required pads/adapters, vehicle height, bay width, ceiling and overhead services, electrical supply, slab condition/strength/anchoring requirements, unloading access and the exact installation manual before supply. Rated capacity alone does not establish vehicle suitability.

Frequently asked questions

How is the 10AP-168 different from the 10AP?
It uses the same 4,536 kg AP-series concept but increases the overall height to approximately 4,267 mm.
Yes. Two overall-width configurations are published.
The current BendPak manufacturer page publishes 622-1,270 mm front-arm reach. The current Genesis page shows an older figure, so Jhuma should use this brief and flag any supplier-confirmed Australian variation rather than mixing values.
The hoist itself is approximately 4,267 mm high. Additional clearance for the building, overhead services and raised vehicles must be reviewed before installation.
Yes. Iron Lift can review bay width, ceiling height, slab, vehicle mix and site access before quoting installation.

Related Pages

Two-Post Hoists

Installation

Servicing & Repairs

Spare Parts

Request a Quote

Related Products

Related products

View All Two-Post Hoists

Installation Service

Installation

Servicing & Repairs

Spare Parts

Documents

brochure

Download

manual

Download

dimension drawing

Download

Request a vehicle hoist quote

Send us your vehicle heights, bay dimensions, ceiling clearance, slab details, power supply and location and we will help confirm whether the BendPak 10AP-168 suits the workshop.