(08) 9249 5550
Get a quote

BendPak 10APX

4,536 kg high-rise clearfloor two-post hoist providing approximately 2,019 mm rise plus pad for increased working height under passenger and light-commercial vehicles.
Get a Vehicle Hoist Quote
View Specifications
Call Iron Lift

Clear-floor two-post

BendPak 10APX

4,536 kg High-Rise Clearfloor Two-Post Hoist

4,536 kg high-rise clearfloor two-post hoist providing approximately 2,019 mm rise plus pad for increased working height under passenger and light-commercial vehicles.

Freight and installation options available — contact us for details.

Request a Quote
Ask About Installation
Call (08) 9249 5550
Quote only · Supply, installation planning, service, and spare parts from Malaga, WA
4,536 kg
Rated capacity
High-rise adaptable clearfloor two-post
Configuration
3,988 mm
Overall height
2,337 mm or 2,591 mm
Drive-through clearance

Product overview

The BendPak 10APX is the high-rise member of the 10AP family. It retains the adaptable-width clearfloor architecture and Bi-Metric AP-series arms, but increases the lifting geometry to give technicians more working height beneath the vehicle. This makes it attractive to busy workshops where underbody, drivetrain and exhaust work benefits from extra vertical access, while the 4,536 kg capacity still covers a broad light-vehicle and light-commercial mix.

Key features

  • 4,536 kg rated lifting capacity
  • High-rise design with approximately 2,019 mm rise + pad
  • Up to approximately 2,261 mm published maximum lifting height with compatible adapter configuration
  • Clearfloor working bay
  • Two published installation widths
  • Bi-Metric arm positioning
  • Triple-telescoping low-profile arms
  • Automatic arm restraints
  • Dual direct-drive hydraulic cylinders
  • 45-second published lifting time

Detail photography

High-rise carriage/arm geometry
AP-series arm telescoping sections
ASARS arm restraint
Expandable-width top beam
Overhead safety shutoff
Direct-drive hydraulic cylinder and lock system

Ideal for

High-throughput service workshops, dealerships, fleet workshops and tyre/suspension facilities that want extra under-vehicle working height without moving to a higher-capacity hoist.

Specifications

Specifications

Details

Capacity
4,536 kg
Configuration
High-rise adaptable clearfloor two-post
Overall height
3,988 mm
Overall width
3,429 mm or 3,683 mm
Drive-through clearance
2,337 mm or 2,591 mm

Factory dimension drawing

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model
BendPak 10APX
BendPak SKU
5175306
Rated lifting capacity
4,536 kg
Maximum load per arm
4,536 kg
Configuration
High-rise adaptable clearfloor two-post
Rise
1,918 mm
Published lifting height
2,019 mm rise + pad; up to 2,261 mm with compatible adapter configuration
Minimum pad / lifting height
102 mm
Time to full rise
45 seconds
Overall height
3,988 mm
Overall width
3,429 mm or 3,683 mm
Width between / inside columns
2,756 mm or 3,010 mm
Drive-through clearance
2,337 mm or 2,591 mm
Front arm reach
622-1,270 mm (current manufacturer page)
Rear arm reach
813-1,505 mm
Power unit
5 HP; Australian voltage/frequency to be confirmed before publication
Model-specific note
High-rise arm/carriage geometry with approx. 2,019 mm rise + pad

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model

Lifting time

Max lifting height without adapter

Max lifting height with adapter

Max lock height without adapter

Max lock height with adapter

Overall height

Overall width

Drive-through clearance

Width between columns

Minimum pad height

Short arm reach

Long arm reach

Gross weight

Pad / pin

What’s included

  • Two-post hoist structure, columns and base plates for the exact model.
  • Model-specific lifting-arm assemblies and vehicle-contact pads/adapters supplied with the Australian package.
  • Hydraulic lifting system, power unit, equalisation system and safety-lock system.
  • Automatic Swing Arm Restraint System (ASARS) where specified for the exact AP-series model.
  • Overhead safety shut-off arrangement on clearfloor models.

Options

  • Compatible truck/van height adapters and frame-contact accessories approved for the exact model.
  • Pinch-weld pads/pucks, frame cradle pads and replacement contact-pad options where compatible.
  • Wheel spotting accessories and compatible workshop accessories where required.
  • Air/electric workstation or other column-mounted service accessories where compatible.

Workshop fit

BendPak 10APX is rated to 4,536 kg. Key published workshop dimensions in this brief include overall height 3,988 mm, overall width 3,429 mm or 3,683 mm, inside-column width 2,756 mm or 3,010 mm and drive-through clearance 2,337 mm or 2,591 mm. Confirm actual vehicle mass, individual arm loading, centre of gravity/weight distribution, manufacturer lifting points, arm reach, required pads/adapters, vehicle height, bay width, ceiling and overhead services, electrical supply, slab condition/strength/anchoring requirements, unloading access and the exact installation manual before supply. Rated capacity alone does not establish vehicle suitability.

Frequently asked questions

How is 10APX different from 10AP?
The 10APX provides greater lifting height while retaining the same 4,536 kg capacity and adaptable AP-series layout.
The current BendPak manufacturer specification is approximately 2,019 mm.
Yes. The published overall-width configurations are approximately 3,429 mm and 3,683 mm.
It may suit many vehicles in those groups, but capacity alone is not enough; lifting points, weight distribution, arm reach and dimensions must be checked.
Yes, subject to site, location and supplier arrangements.

Related Pages

Two-Post Hoists

Installation

Servicing & Repairs

Spare Parts

Request a Quote

Related Products

Related products

View All Two-Post Hoists

Installation Service

Installation

Servicing & Repairs

Spare Parts

Documents

brochure

Download

manual

Download

dimension drawing

Download

Request a vehicle hoist quote

Tell us your vehicle mix, desired working height, bay width, ceiling height, slab details, power supply and location and we will help assess the BendPak 10APX.