(08) 9249 5550
Get a quote

BendPak 10AP

4,536 kg clearfloor two-post hoist with adaptable installation width and flexible AP-series arm geometry for mixed professional workshop use.
Get a Vehicle Hoist Quote
View Specifications
Call Iron Lift

Clear-floor two-post

BendPak 10AP

4,536 kg Adaptable-Width Clearfloor Two-Post Hoist

4,536 kg clearfloor two-post hoist with adaptable installation width and flexible AP-series arm geometry for mixed professional workshop use.

Freight and installation options available — contact us for details.

Request a Quote
Ask About Installation
Call (08) 9249 5550
Quote only · Supply, installation planning, service, and spare parts from Malaga, WA
4,536 kg
Rated capacity
Adaptable clearfloor two-post
Configuration
3,683 mm
Overall height
2,337 mm or 2,591 mm
Drive-through clearance

Product overview

The BendPak 10AP is the core adaptable-width model in the modern AP two-post family. It combines a clearfloor working bay with an expandable top beam, allowing the columns to be configured in a narrower or wider arrangement to suit different workshop bays. Bi-Metric arm geometry and long-reach telescoping arms are intended to cover a broad range of lifting points without changing the basic hoist layout. For workshops servicing passenger vehicles, SUVs, utes and many light-commercial vehicles, the 10AP provides a flexible 4,536 kg platform while preserving an unobstructed floor between the columns.

Key features

  • 4,536 kg rated lifting capacity
  • Clearfloor design with no floorplate across the working bay
  • Two published overall-width configurations
  • Bi-Metric symmetric/asymmetric vehicle positioning
  • Triple-telescoping low-profile arms
  • Automatic swing-arm restraint system
  • Dual direct-drive hydraulic cylinders
  • Single-point safety-lock release
  • 102 mm minimum pad height
  • 45-second published lifting time

Detail photography

Expandable top-beam/width configuration
AP-series triple-telescoping arms
ASARS arm restraints
Low-profile arm and pad receiver
Direct-drive hydraulic cylinder
Single-point safety release and overhead safety bar

Ideal for

General mechanical workshops, dealerships, tyre/suspension workshops and mixed light-vehicle fleets that want one adaptable clearfloor two-post platform for a wide range of vehicle sizes.

Specifications

Specifications

Details

Capacity
4,536 kg
Configuration
Adaptable clearfloor two-post
Overall height
3,683 mm
Overall width
3,429 mm or 3,683 mm
Drive-through clearance
2,337 mm or 2,591 mm

Factory dimension drawing

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model
BendPak 10AP
BendPak SKU
5175304
Rated lifting capacity
4,536 kg
Maximum load per arm
4,536 kg
Configuration
Adaptable clearfloor two-post
Rise
1,753 mm
Published lifting height
1,854 mm rise + pad; up to 2,096 mm with compatible pad/adapter configuration per current manufacturer data
Minimum pad / lifting height
102 mm
Time to full rise
45 seconds
Overall height
3,683 mm
Overall width
3,429 mm or 3,683 mm
Width between / inside columns
2,756 mm or 3,010 mm
Drive-through clearance
2,337 mm or 2,591 mm
Front arm reach
622-1,270 mm
Rear arm reach
813-1,505 mm
Power unit
5 HP; Australian voltage/frequency to be confirmed before publication
Model-specific note
Expandable top beam; two installation widths

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Public model

Lifting time

Max lifting height without adapter

Max lifting height with adapter

Max lock height without adapter

Max lock height with adapter

Overall height

Overall width

Drive-through clearance

Width between columns

Minimum pad height

Short arm reach

Long arm reach

Gross weight

Pad / pin

What’s included

  • Two-post hoist structure, columns and base plates for the exact model.
  • Model-specific lifting-arm assemblies and vehicle-contact pads/adapters supplied with the Australian package.
  • Hydraulic lifting system, power unit, equalisation system and safety-lock system.
  • Automatic Swing Arm Restraint System (ASARS) where specified for the exact AP-series model.
  • Overhead safety shut-off arrangement on clearfloor models.

Options

  • Compatible truck/van height adapters and frame-contact accessories approved for the exact model.
  • Pinch-weld pads/pucks, frame cradle pads and replacement contact-pad options where compatible.
  • Wheel spotting accessories and compatible workshop accessories where required.
  • Air/electric workstation or other column-mounted service accessories where compatible.

Workshop fit

BendPak 10AP is rated to 4,536 kg. Key published workshop dimensions in this brief include overall height 3,683 mm, overall width 3,429 mm or 3,683 mm, inside-column width 2,756 mm or 3,010 mm and drive-through clearance 2,337 mm or 2,591 mm. Confirm actual vehicle mass, individual arm loading, centre of gravity/weight distribution, manufacturer lifting points, arm reach, required pads/adapters, vehicle height, bay width, ceiling and overhead services, electrical supply, slab condition/strength/anchoring requirements, unloading access and the exact installation manual before supply. Rated capacity alone does not establish vehicle suitability.

Frequently asked questions

What makes the 10AP adaptable?
Its top beam and column arrangement support two published overall-width configurations, giving more flexibility when fitting the hoist to a workshop bay.
Yes. BendPak describes the AP arm geometry as Bi-Metric, supporting both spotting approaches within the approved lifting envelope.
4,536 kg, with a published maximum of 1,134 kg per arm.
The published minimum lifting height with pad is approximately 102 mm.
Iron Lift can quote supply, installation, servicing, repairs and parts support subject to location and supplier arrangements.

Related Pages

Two-Post Hoists

Installation

Servicing & Repairs

Spare Parts

Request a Quote

Related Products

Related products

View All Two-Post Hoists

Installation Service

Installation

Servicing & Repairs

Spare Parts

Documents

brochure

Download

manual

Download

dimension drawing

Download

Request a vehicle hoist quote

Tell us your vehicle mix, bay width, ceiling height, slab details, electrical supply and location and we will help confirm the most suitable BendPak 10AP installation width and setup.