Flexible heavy-vehicle lifting for fleet, transport, mining and commercial workshops. Compare mobile column systems from leading heavy-duty brands and let Iron Lift help specify the right configuration for your vehicles.
What Is a Mobile Column Lift?
A mobile column lift uses separate lifting columns positioned at the vehicle wheels. The columns operate together as a synchronised lifting system, raising the vehicle while leaving the underside largely unobstructed for service and repair work.
Unlike a permanently installed fixed hoist, mobile columns can be moved around the workshop and, depending on the system, configured in different numbers to suit various axle counts and heavy-vehicle applications. This makes them particularly attractive for mixed fleets and workshops where bay flexibility matters.
Why Mobile Columns?
Mobile columns combine heavy-duty capacity with flexible bay use and broad access beneath the vehicle.
Bring the lift to the vehicle rather than permanently dedicating the bay to one fixed hoist.
Support at the wheels leaves excellent access beneath the chassis for service and repair work.
Suitable systems can be configured for different vehicle types, axle counts and wheel arrangements.
Additional columns may be used where the manufacturer and vehicle configuration allow.
A mobile system can often be repositioned or moved with the workshop, subject to manufacturer requirements.
Useful where permanent post locations would reduce bay flexibility.
Specialist models are available for very high per-column loads and large-wheel applications.
Iron Lift can assist with system selection, servicing, repairs and supported spare parts.
Compare the Range
Compare key capacity and application information, then open the individual product page for model-specific specifications and a project quote.
Stertil-Koni
Entry point in the current Stertil-Koni heavy-duty mobile-column range.
Stertil-Koni
Mainstream commercial trucks, buses and heavy-duty fleet applications.
Stertil-Koni
Higher-capacity mixed fleets, trucks and buses with an adjustable fork system.
Stertil-Koni
Heavy vehicles and specialist applications requiring greater per-column capacity.
Stertil-Koni
Very heavy vehicles and large-wheel specialist applications.
Stertil-Koni
Extreme heavy-duty equipment and specialist industrial applications.
Endurequip
Australian-made electro-mechanical mobile hoist for trucks, buses, fleets, defence and specialist use.
Stertil-Koni
Entry point in the current Stertil-Koni heavy-duty mobile-column range.
Endurequip
Australian-made electro-mechanical mobile hoist for trucks, buses, fleets, defence and specialist use.
Stertil-Koni
Very heavy vehicles and large-wheel specialist applications.
Stertil-Koni
Extreme heavy-duty equipment and specialist industrial applications.
Endurequip
Australian-made electro-mechanical mobile hoist for trucks, buses, fleets, defence and specialist use.
Stertil-Koni
Entry point in the current Stertil-Koni heavy-duty mobile-column range.
Stertil-Koni
Higher-capacity mixed fleets, trucks and buses with an adjustable fork system.
Stertil-Koni
Heavy vehicles and specialist applications requiring greater per-column capacity.
Stertil-Koni
Very heavy vehicles and large-wheel specialist applications.
Stertil-Koni
Extreme heavy-duty equipment and specialist industrial applications.
Stertil-Koni
Higher-capacity mixed fleets, trucks and buses with an adjustable fork system.
Stertil-Koni
Heavy vehicles and specialist applications requiring greater per-column capacity.
Stertil-Koni
Extreme heavy-duty equipment and specialist industrial applications.
Stertil-Koni Range Comparison
Stertil-Koni’s current mobile-column range spans 6,500 kg to 17,500 kg per column. Iron Lift can help determine which model and configuration suit your vehicles.
| Model | Capacity / Column | Fork Type | Fork Width / Note | Best-Fit Positioning |
|---|---|---|---|---|
|
ST 1065 |
6,500 kg |
Fixed |
770 mm |
Commercial fleet entry point |
|
ST 1075 |
7,500 kg |
Adjustable |
240–560 mm |
Trucks, buses and fleet applications |
|
ST 1085 |
8,500 kg |
Adjustable |
240–560 mm |
Higher-capacity mixed fleets |
|
ST 1100 |
10,000 kg |
Adjustable |
240–560 mm |
Heavy vehicles and specialist applications |
|
ST 1130 |
13,000 kg |
Fixed |
Large-wheel / specialist |
Very heavy vehicles |
|
ST 1175 |
17,500 kg |
Fixed |
Extreme heavy-duty |
Specialist industrial equipment |
Stertil-Koni Technology
Stertil-Koni’s current mobile-column range uses hydraulic lifting technology with synchronised column control. Current official information describes automatic overload protection and an independent mechanical locking system across the mobile-column range, with wireless and other control arrangements depending on model.
Selected models can also feature Stertil-Koni’s ebright Smart Control system. Iron Lift will confirm control type, capacity, lift height, wheel range and accessories for the model being quoted.
Australian-Made Option
Portalift is an Australian-made electro-mechanical mobile heavy-vehicle hoist designed for trucks, buses, fleet, defence and specialist applications. Current Endurequip information lists 7.5 tonnes per column, with sets of 4, 6, 8 and 10 columns.
Vehicle configuration, axle loads, wheel size and manufacturer instructions still determine the correct setup for each vehicle.
How It Works
A mobile column system brings the lifting equipment to the vehicle and raises the selected wheel positions together as a coordinated system.
Move the required columns to the vehicle and align the wheel forks or approved lifting interface.
Connect or pair the columns according to the manufacturer's control system and vehicle arrangement.
The columns lift together while the control system maintains the required synchronisation.
Technicians gain broad access beneath the vehicle for inspection, service and repair work.
Configuration Guide
The answer depends on the vehicle, axle count, axle loads, wheel dimensions and the selected manufacturer. Four-column sets are common, while multi-axle buses, trucks, combinations and specialist vehicles may require six, eight or more columns. The correct configuration must be confirmed against the lift manufacturer’s specifications and the actual vehicle.
Applications
Mobile column systems can serve a broad range of commercial and specialist vehicles when the selected model and configuration meet the manufacturer’s requirements.
General heavy transport, rigid trucks, prime movers and fleet service applications.
Public transport, coach and bus fleet workshop servicing.
Suitable specialist models can support very heavy or large-wheel equipment where manufacturer limits are met.
Vehicle-specific configuration and verified lifting points are essential.
Selected systems can suit tractors and agricultural machinery.
Airport and specialist ground-support applications where model specifications suit.
Heavy specialist vehicles and equipment requiring high-capacity lifting.
Control Options
Some mobile column systems are available with wireless control, while other models or manufacturers use cabled or alternative arrangements. The best choice depends on workshop layout, duty cycle, power availability, operating preference and the specific manufacturer.
Before We Quote
The more we know about your vehicles and workshop, the better we can narrow the lifting solution.
Tell us exactly what trucks, buses or specialist vehicles you need to lift.
GVM or actual operating mass helps establish the capacity range.
Axle count and known axle loads guide column quantity and model selection.
Rim size, tyre outside diameter and width affect fork compatibility.
Tell us about other vehicles the same system may need to lift.
Required lift height and the work being performed influence system choice.
Floor condition, available bay space and access need to suit the equipment.
Indoor, outdoor, wash-bay or field use can influence the correct product.
Control and charging arrangements differ between systems.
Tell us if the system must move between bays, depots or field sites.
Expected lifts per day helps match equipment to real workshop demand.
Include trailers, off-road equipment, agriculture or unusual wheel arrangements.
Accessories & Support Equipment
Depending on the brand and model, mobile column lifting can be supported by workshop accessories designed around specific vehicle and service requirements.
Axle and support stands for approved heavy vehicle service applications.
Approved crossbeams and lifting adaptors where supported by the selected system.
Small-wheel, special-wheel and forklift adaptors where manufacturer compatibility is confirmed.
Batteries, chargers, controls and spare parts for supported mobile-column equipment.
Service, Inspection & Repairs
Mobile column lifts are high-value workshop assets. Iron Lift can assist with planned servicing, safety inspections, fault diagnosis, repairs, replacement components and refurbishment work across supported equipment.
Send the manufacturer, model, serial number, a clear photo of the part and a short description of the fault.
Projects & Proof
Iron Lift understands the service, repair and maintenance work that keeps mobile column systems useful long after delivery.
Repairs, controls, mechanical work and component replacement for existing equipment.
Planned servicing and safety inspection programs for high-use workshop lifting equipment.
Project support for new heavy-vehicle lifting systems, configuration and handover.
Frequently Asked Questions
A mobile column lift uses individual lifting columns positioned around a heavy vehicle, normally at the wheels, and operates them together as a coordinated lifting system.
It depends on axle count, axle loads, wheel dimensions, vehicle configuration and the selected manufacturer. Four-column systems are common, while multi-axle and specialist vehicles may require more.
Capacity is model-specific and usually stated per column. Current ranges sold in the market vary widely, so total system capacity must be assessed together with vehicle and axle loads.
Wireless systems are available, but control and power arrangements differ by manufacturer and model. Iron Lift can recommend a suitable option for the workshop.
Potentially, provided the selected system accommodates the relevant wheel sizes, axle loads, vehicle configuration and capacity requirements.
One of their main advantages is mobility. Requirements still vary by manufacturer and the workshop floor must be suitable for the equipment and load.
Some manufacturers describe certain systems as suitable for outdoor or field use, but the exact equipment rating, surface, weather conditions and operating instructions must be checked before use.
Neither is universally better. Mobile columns prioritise flexibility, while a fixed platform or in-ground system may suit a dedicated high-throughput bay. The best choice depends on fleet, workshop and work type.
Iron Lift can assess servicing, inspection, repair and parts requirements across supported mobile column equipment. Send the manufacturer, model, serial number and photos.
Tell us about the vehicle, wheel sizes, axle configuration and workshop so we can help identify a suitable mobile column system.
Vehicle, wheel, compliance plate and workshop photos can help us assess the application.
Need to Lift a Truck, Bus or Specialist Vehicle?
Send Iron Lift the vehicle details, approximate weight, axle configuration and workshop location. We can help identify a suitable mobile column system and prepare a project-specific quotation.
Not sure what information to send? Upload a vehicle photo, wheel photo and compliance plate and we will help work through it.
