(08) 9249 5550
Get a quote

Iron Lift MONARCH 40A

Get a Vehicle Hoist Quote
View Specifications
Call Iron Lift
Iron Lift MONARCH 40A
Iron Lift MONARCH 40A
UP / LOCK / DOWN control unit
Iron Lift MONARCH 40A
Iron Lift MONARCH 40A
UP / LOCK / DOWN control unit

Clear-floor two-post

Iron Lift MONARCH 40A

4,000 kg

4,000 kg alignment-capable four-post hoist with adjustable runway spacing, turnplate pockets, and 2,498 mm drive-through clearance for service and alignment bays

Freight and installation options available — contact us for details.

REQUEST A QUOTE
Ask About Installation
Call (08) 9249 5550
Quote only · Supply, installation planning, service, and spare parts from Malaga, WA
4,000 kg
Rated capacity
1,940 mm
Maximum lifting height
3,208 mm
Overall width
2,498 mm
Drive-through clearance

Product overview

The Iron Lift MONARCH 40A is a 4,000 kg alignment-capable four-post hoist for workshops that want one drive-on bay for general service, inspection and wheel-alignment work. Adjustable runway spacing and integrated non-skid diamond runways provide flexibility across different vehicle tracks, while adjustable turnplate pockets support alignment setup. The hoist uses a 24 V control system with UP, LOCK and DOWN operation, mechanical safety locks and air-driven lock release with cable-slack protection.

Key features

  • 4,000 kg rated lifting capacity
  • Alignment-capable four-post configuration
  • Stepless adjustable width between runways
  • Integrated non-skid diamond runways
  • Adjustable turnplate pockets for different wheelbases
  • 24 V control system with UP, LOCK and DOWN operation
  • Primary mechanical safety locks plus cable-slack protection
  • Air-driven safety-lock release
  • 2,498 mm drive-through clearance
  • Optional extension platform, turnplates, air-line kit and rolling jacks

Detail photography

UP / LOCK / DOWN control unit
UP / LOCK / DOWN control unit
Mechanical safety-lock system
Adjustable turnplate pockets / blocks
Non-skid diamond runways and width adjustment
Runway / crossbeam construction
Optional 660 mm extension platform
Optional turnplates / air-line kit
Optional rolling jack configuration

Ideal for

Wheel-alignment centres, tyre and suspension workshops, dealerships, mechanical workshops and fleet service bays needing a drive-on four-post platform suitable for general under-vehicle service and alignment work.

Specifications

Specifications

Details

Factory dimension drawing

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Rated lifting capacity
4,000 kg (9,000 lb)
Configuration
Alignment four-post
Lifting time
Approx. 45 seconds
Maximum lifting height
Approx. 45 seconds
Maximum lock height – top of runway
1,860 mm
Minimum platform height
220 mm
Overall height
2,185 mm
Overall length including ramps
5,512 mm
Runway length
4,242 mm
Overall width
3,208 mm
Drive-through clearance
2,498 mm
Width between columns
2,852 mm
Width between runways
Adjustable 900-1,292 mm; 1,100 mm nominal
Outside edge of runways
Adjustable 1,916-2,308 mm; 2,116 mm nominal
Maximum underneath height
1,750 mm
Maximum underneath lock height
1,670 mm
Four-wheel alignment range
2,004-3,652 mm wheelbase
Maximum two-wheel alignment
3,686 mm
Gross weight
Approx. 1,142 kg
Motor
3.0 HP
Control system
24 V control circuit; UP / LOCK / DOWN

Letters A–F match the diagrams above. Figures follow the Iron Lift FORGE 45DA factory sheet. Confirm before locking brochure artwork or a firm install quote.

Field

Letter

Value

Rated lifting capacity

Lifting time

Max lifting height without adapter

Max lifting height with adapter

Max lock height without adapter

Max lock height with adapter

Overall height

Overall width

Drive-through clearance

Width between columns

Minimum pad height

Short arm reach

Long arm reach

Gross weight

Pad / pin

What’s included

  • Four-post hoist structure, crossbeams and alignment runways
  • Integrated non-skid diamond platforms
  • Adjustable runway spacing
  • Adjustable turnplate pockets / blocks
  • 24 V UP / LOCK / DOWN control system

Options

  • 660 mm extension platform - source kit 40903
  • Adjustable blocks for extension platform - source kit 40905
  • Turnplate set - source kit 40101
  • Air-line kit for rolling-jack use - source kit 40102

Workshop fit

Overall length including ramps is 5,512 mm, overall width 3,208 mm and drive-through clearance 2,498 mm. Runways are 4,242 mm long with adjustable spacing. Confirm vehicle mass, track and wheelbase range, approach clearance, site electrical supply, compressed-air provision for the lock-release system, slab/foundation suitability and unloading access. Turnplates and rolling jacks are options unless specifically included in the quote.

Frequently asked questions

Can MONARCH 40A be used for both general service and alignment work?
Yes. It is an alignment-capable four-post layout with adjustable turnplate pockets and runway geometry, while still providing drive-on access for general service.
The hoist has adjustable turnplate pockets. The manufacturer lists the turnplate set as an option, so the supplied configuration must be confirmed on the Iron Lift quote.
The source lists a four-wheel alignment range of approximately 2,004-3,652 mm and a maximum two-wheel alignment dimension of 3,686 mm.
The standard configuration uses an air-driven safety-lock release. Iron Lift should confirm workshop air provision before installation.
Yes. Manual and pneumatic-hydraulic rolling-jack options are listed. The correct jack capacity/configuration must be selected for the intended vehicles.

Related Pages

Two-Post Hoists

Installation

Servicing & Repairs

Spare Parts

Request a Quote

Related Products

Related products

View All Two-Post Hoists

Installation Service

Installation

Servicing & Repairs

Spare Parts

Documents

brochure

Download

manual

Download

dimension drawing

Download

Request a vehicle hoist quote